DentalTwin Customer Guide
DentalTwin
AI-Powered Designs. Validated by dental technicians. Risk-Free.
What is DentalTwin?
DentalTwin is a platform for AI-assisted prosthetic design in dental technology. You submit your intraoral scan—DentalTwin creates the finished design, a trained dental technician reviews it, and the STL file is then available for download.
The Three Fundamental Principles
⏱ Speed — Average 15 minutes for a single crown — larger cases typically under 45 minutes.
✓ Quality Assurance — Every case is reviewed and approved by a trained dental technician. At no extra cost.
€ No financial risk — Credits are only charged upon download. Unsupported case = no costs.
Our Products
All three products use the same credit system (3 credits per unit, €1.00 per credit), the same processing time, and the same QA process.
|
DentaBRIDGE |
DentaTEMP |
DentaWAX |
|
Final Crowns & Bridges |
Eggshell Temporaries for Crowns and Bridges (0.3 mm thickness) |
Digital tooth setup |
|
✓ Multiple fully anatomical crowns and bridges on prepared teeth. Requires at least two natural reference teeth on the arch. ✓ Zirconia, PMMA, metal, and others. ✓ STL – Ready for Milling ✓ Quality assurance by trained dental technicians (see figure 1.0) |
✓ Basis: scan before preparation/pre-op scan ✓ Single crowns or multi-unit supported ✓ STL – Ready for Milling ✓ Quality assurance by trained dental technicians (see figure 1.1) |
✓ Digital Tooth Setup for your Prosthetically Guided Planning ✓ Compatible with leading implant planning software including coDiagnostiX, Simplant, and SMOP. ✓ Quality assurance by trained dental technicians (see figure 1.2) |
What You Need for Submission
To ensure your case is processed smoothly, we require:
DentaBRIDGE:
- Intraoral scan as STL, OBJ, or PLY — export directly from your scanner.
- Scan in occlusion (bite embedded — no separate bite registration file)
- Preparation margin fully visible, free of soft tissue and artifacts.
- At least two natural reference teeth in the jaw
Fully and correctly completed order form; the details must match the scan.
DentaTEMP:
- Intraoral scan prior to preparation / Situational scan in STL, OBJ, or PLY format — Export directly from your scanner. (see figure 5.0/5.1)
- The design is based on the anatomy of the situation scan; no bite elevation. (see figure 6.0/6.1)
- Fully and correctly completed order form; the details must match the scan.
DentaWAX:
-
Intraoral scan as STL, OBJ, or PLY — export directly from your scanner.
(see figure 7.0/7.1)
- At least two natural reference teeth in the jaw (see figure 8.0/8.1)
- At least one missing tooth (see figure 9.0)
Fully and correctly completed order form; the details must match the scan.
Price & Credits
No software installation. No hardware. No minimum contract term. Buy what you need.
|
Type of Care |
Price |
Credits |
|
Single Crown |
3,00 € |
3 Credits |
|
3-unit bridge |
9,00 € |
9 Credits |
|
14-unit bridge |
42,00 € |
42 Credits |
Subscriptions for regular volume:
Available starting at 60 credits per month — including bonus credits at higher tiers (up to 1,560 bonus credits per year). Credits do not expire.
Getting Started
|
1 |
Register at portal.dentaltwin.com — 3 free test cases included. |
|
2 |
Export intraoral scan as STL, OBJ, or PLY (in occlusion) |
|
3 |
Upload scan and complete the order form. |
|
4 |
AI creates the design — Dental technician reviews and approves. |
|
5 |
The approved STL file is available for download. |
|
6 |
Preview the design first — credits are only charged when you download. |
|
Start now! portal.dentaltwin.com/register 3 free test cases — immediately |
Support help.dentaltwin.com support@dentaltwin.com dentaltwin.com - Quickly reachable via live chat |